You see, cleaning the gunk out of the bathroom sink drain is what people often search online when there is some sort of blockage causing the problem. And to be honest, this has an easy fix as well, like you don’t need to call a professional, you can do it all by yourself. Though, the first step is to gather all the stuff to get rid of the troublesome blockage. The list of materials you’ll need to have is as follows: Baking soda, White vinegar, Boiling water, Dish soap, Drain snake, or Zip-It tool (optional). Alright, now let’s get to the actual step-by-step process of how to clean the gunk out of the bathroom sink drain, shall we?
Step 1: Remove Any Visible Debris
First things first, check for all visible dangling matter or debris in the drain, it could be that’s what is causing the problem. You know, just lift the stopper and pull out the hair, soap, or any other type of buildup you can see down there. This is the easy stuff, and you can easily take it away. If any gooey junk sticks to the hair, wipe it with a sponge or cloth to get it off. It can very well be that this surface-level blockage is all that is causing the issue, and if you clean it regularly, you can easily prevent bigger blockages down the line.
Step 2: Use Dish Soap and Boiling Water
Try this method for breaking down greasy buildups, and believe us, it works wonders. Begin with a little bit of dish soap, about half a cup, and pour it into the drain. The soap breaks down the grease and oily residue. Then, grab your kettle and boiling water, pour it down the drain, and such that the water runs down the sides of the pipe slowly to avoid splashes.
Quick tip: If you have a PVC-made pipe, boiling water might be too hot, and you may damage it. So yes, if you are unsure, use the hot tap water instead; it should be of great help, and if the situation persists, just carry on with the next step.
Step 3: Try Baking Soda and Vinegar
Even if your drain is still sluggish after all the other methods, you’ve ultimately hit upon the method that’s going to save your day: the almighty baking soda with the magic of vinegar, you know?
The whole thing is super simple: Pour half a cup of baking soda into your sink, sewer, or toilet, and add to it a full cup of vinegar. In the next moment, the mixture begins foaming all over! Cover the drain with a stopper or a damp cloth to contain the big effect. Allow it to do its thing for about 10-15 minutes. Then, use the hot water from your kitchen faucet or a kettle or something like that, to rinse off all the filth and debris that was cleared up by the baking soda and vinegar mixture.
Step 4: Use a Drain Snake for Stubborn Clogs
If the clog is still there, try the drain snake. This tool is perfect for removing deep, tough clogs, especially entangled hair. Feed the snake into the drain until you can feel that it has hit something, where the jam is.