We can all agree that mold is bad, how about that? Well, the bathroom is one of the few places where mold can build and it just looks unattractive, however, it can also be harmful to those who are sensitive and may have allergic reactions to mold. The good news is that you can remove it very easily, and if measures are taken right, you can ensure that it won’t return. So, let’s see how to get rid of mold in the bathroom, shall we?
Step 1: Effective Cleaning Methods
When you see mold growing somewhere in your bathroom space, you should never just let it sit, you should always deal with it no matter what. White vinegar or baking soda natural cleaners are effective for small patches, just so you know. The first step is to spray the vinegar directly on the area, then let it sit for 10 minutes. The last step is scrubbing the area with a brush. With the baking soda method, you can just mix it up with water and spray it on the affected area, let it sit for about 10 to 20 minutes, and then give it a good scrub, that’s all. But for those more stubborn mold, use bleach on non-porous surfaces like tiles and bathtubs. Once you mix 1 part bleach with 10 parts water, spray it on the mold and leave it for 10 minutes. After that, scrub the area, rinse thoroughly, and dry it completely. That’s all.
Step 2: Here Is How You Should Go About It
Letting some air into the bathroom like opening a window or the exhausting fan is quite important before cleaning all those nasty molds. Always! This way you’ll certainly be minimizing the risk of not inhaling the mold spores while dealing with the build-up. It would be best if you used your selected cleaners, whether they are in some natural way like baking soda, vinegar, or one like bleach. On top of that, always wear your mask and gloves. It would be better to leave it on the surface for 10 to 15 minutes so that it can do its job and penetrate the root of the mold. Then, you can take either a hard-bristled brush or a sponge and scrub it off.
After the scrubbing is done, make sure that the area is rinsed with clean water so that you can remove any excess or leftover cleaning agents as well as mold particles. Completely dry the area afterward because no moisture should be left which would only result in the regrowth of the mold.
Step 3: Preventing Mold From Returning
You see, the humidity level in bathrooms, especially after a shower, is extremely high requiring special moisture-prevention measures. So, you should always opt for the exhaust system in your bathroom when showering and you should also leave it on for some reasonable time, like 20-30 minutes to remove the excess steam and heat from the air.
After each time you shower, you can be proactive and wipe down the soaking wet surfaces of the shower by using a squeegee. It may sound time-consuming, but honestly, it lessens the accumulation of water which is the reason behind mold growth.